Small Beer Flight CNC Files Carbide Create SVG (NO tool Changes)
$4.99
Here is a set of files to create a Beer flight via CNC. This is a digital download item. You will receive no physical item. The download will include a Carbide Create .C2d file as well as the SVG file for the item.
This can be created with a SINGLE bit! The #201 endmill that was included with all ShapeOKO's! A single 1/4" cutter will successfully carve this file.
This is a very cool looking Beer flight that I designed personally. Influence was a charcuterie board that looked very manly so I wanted a flight board that looked similar.
It is roughly 20" x 5" with Four 2.25 inch circle pockets that will hold the beer glasses. I personally use 4 ounce glasses that I got from Amazon. (https://amzn.to/3kMkpch) The glasses are $13 for 4. Of course they are not included in this purchase!
You are free to modify the file to fit your flight glasses.
I have successfully created this item on my ShapeOKO 4XXL. See the photos for the one that I cut out of a sweet piece of cherry hardwood.
I'll also include a text file with the link to the glasses and some tips on the file. Ask any questions! I Hope to see your board when you are done!
I also have a larger beer flight board in my shop as well as some cool Bourbon and Shot flights!
This can be created with a SINGLE bit! The #201 endmill that was included with all ShapeOKO's! A single 1/4" cutter will successfully carve this file.
This is a very cool looking Beer flight that I designed personally. Influence was a charcuterie board that looked very manly so I wanted a flight board that looked similar.
It is roughly 20" x 5" with Four 2.25 inch circle pockets that will hold the beer glasses. I personally use 4 ounce glasses that I got from Amazon. (https://amzn.to/3kMkpch) The glasses are $13 for 4. Of course they are not included in this purchase!
You are free to modify the file to fit your flight glasses.
I have successfully created this item on my ShapeOKO 4XXL. See the photos for the one that I cut out of a sweet piece of cherry hardwood.
I'll also include a text file with the link to the glasses and some tips on the file. Ask any questions! I Hope to see your board when you are done!
I also have a larger beer flight board in my shop as well as some cool Bourbon and Shot flights!
Here is a set of files to create a Beer flight via CNC. This is a digital download item. You will receive no physical item. The download will include a Carbide Create .C2d file as well as the SVG file for the item.
This can be created with a SINGLE bit! The #201 endmill that was included with all ShapeOKO's! A single 1/4" cutter will successfully carve this file.
This is a very cool looking Beer flight that I designed personally. Influence was a charcuterie board that looked very manly so I wanted a flight board that looked similar.
It is roughly 20" x 5" with Four 2.25 inch circle pockets that will hold the beer glasses. I personally use 4 ounce glasses that I got from Amazon. (https://amzn.to/3kMkpch) The glasses are $13 for 4. Of course they are not included in this purchase!
You are free to modify the file to fit your flight glasses.
I have successfully created this item on my ShapeOKO 4XXL. See the photos for the one that I cut out of a sweet piece of cherry hardwood.
I'll also include a text file with the link to the glasses and some tips on the file. Ask any questions! I Hope to see your board when you are done!
I also have a larger beer flight board in my shop as well as some cool Bourbon and Shot flights!
This can be created with a SINGLE bit! The #201 endmill that was included with all ShapeOKO's! A single 1/4" cutter will successfully carve this file.
This is a very cool looking Beer flight that I designed personally. Influence was a charcuterie board that looked very manly so I wanted a flight board that looked similar.
It is roughly 20" x 5" with Four 2.25 inch circle pockets that will hold the beer glasses. I personally use 4 ounce glasses that I got from Amazon. (https://amzn.to/3kMkpch) The glasses are $13 for 4. Of course they are not included in this purchase!
You are free to modify the file to fit your flight glasses.
I have successfully created this item on my ShapeOKO 4XXL. See the photos for the one that I cut out of a sweet piece of cherry hardwood.
I'll also include a text file with the link to the glasses and some tips on the file. Ask any questions! I Hope to see your board when you are done!
I also have a larger beer flight board in my shop as well as some cool Bourbon and Shot flights!
Here is a set of files to create a Beer flight via CNC. This is a digital download item. You will receive no physical item. The download will include a Carbide Create .C2d file as well as the SVG file for the item.
This can be created with a SINGLE bit! The #201 endmill that was included with all ShapeOKO's! A single 1/4" cutter will successfully carve this file.
This is a very cool looking Beer flight that I designed personally. Influence was a charcuterie board that looked very manly so I wanted a flight board that looked similar.
It is roughly 20" x 5" with Four 2.25 inch circle pockets that will hold the beer glasses. I personally use 4 ounce glasses that I got from Amazon. (https://amzn.to/3kMkpch) The glasses are $13 for 4. Of course they are not included in this purchase!
You are free to modify the file to fit your flight glasses.
I have successfully created this item on my ShapeOKO 4XXL. See the photos for the one that I cut out of a sweet piece of cherry hardwood.
I'll also include a text file with the link to the glasses and some tips on the file. Ask any questions! I Hope to see your board when you are done!
I also have a larger beer flight board in my shop as well as some cool Bourbon and Shot flights!
This can be created with a SINGLE bit! The #201 endmill that was included with all ShapeOKO's! A single 1/4" cutter will successfully carve this file.
This is a very cool looking Beer flight that I designed personally. Influence was a charcuterie board that looked very manly so I wanted a flight board that looked similar.
It is roughly 20" x 5" with Four 2.25 inch circle pockets that will hold the beer glasses. I personally use 4 ounce glasses that I got from Amazon. (https://amzn.to/3kMkpch) The glasses are $13 for 4. Of course they are not included in this purchase!
You are free to modify the file to fit your flight glasses.
I have successfully created this item on my ShapeOKO 4XXL. See the photos for the one that I cut out of a sweet piece of cherry hardwood.
I'll also include a text file with the link to the glasses and some tips on the file. Ask any questions! I Hope to see your board when you are done!
I also have a larger beer flight board in my shop as well as some cool Bourbon and Shot flights!
