Carbide Create files for Bottle Openers - Two Sizes - Great to sell - Great as Gifts
$4.99
Bottle Opener Carbide Create Files - Digital Download
Two Sizes! Two Carbide Create files only. Download and Carve!
There is NO SVG. No GCode included. You will get the Carbide Create Files that are ready to create GCode and carve!
I have files for both the "mini" and what I consider "standard" sized bottle opener. I personally prefer the mini but you can easily make both and decide for yourself! Both of them will readily accept the "plate" style opener that you can purchase in bulk from many vendors. I’ll share links to the inserts I purchased from Amazon.
You can literally download this file, set your stock size, and start carving. Make one or nest them and make a dozen! These make great gifts.
It's your typical bottle opener design that you can find almost anywhere. I'm not recreating the wheel here. What I have done however, is brought it into Carbide Create, made adjustments, and added toolpaths.
You will also get a PDF file with all my notes about the files as well. A LOT OF NOTES! I try to document what I did and why I did it so you will have a better understanding of Carbide Create and the carve itself. I also include a lot of tips and tricks that help in general. I will also share my experiences with purchasing inserts from Amazon as well as other vendors.
I can't test every insert available so you need to be able to adjust toolpaths to fit whatever insert you are purchasing. I help as much as possible with the included PDF.
Included in this digital download: Two Carbide Create Files, one with a regular size, one with a mini size bottle opener. One PDF with instructions and notes. NO SVG or other program files included.
Designed on CC Build 623 and 648
My photos will show my prototype and testing on some pine material. I suggest you use a hardwood for your final product. My photos also show cherry which worked great.
My photos show an engraving on the opposite side of the opener. I did that with a laser. The engraving IS NOT included in these files.
This is a digital download that includes ONLY Carbide Create files. If you are not knowledgeable of Carbide Create perhaps you should look at my other files that also include an SVG. THERE IS NO SVG IN THIS DOWNLOAD. Carbide Create can generate the GCode for you.
Two Sizes! Two Carbide Create files only. Download and Carve!
There is NO SVG. No GCode included. You will get the Carbide Create Files that are ready to create GCode and carve!
I have files for both the "mini" and what I consider "standard" sized bottle opener. I personally prefer the mini but you can easily make both and decide for yourself! Both of them will readily accept the "plate" style opener that you can purchase in bulk from many vendors. I’ll share links to the inserts I purchased from Amazon.
You can literally download this file, set your stock size, and start carving. Make one or nest them and make a dozen! These make great gifts.
It's your typical bottle opener design that you can find almost anywhere. I'm not recreating the wheel here. What I have done however, is brought it into Carbide Create, made adjustments, and added toolpaths.
You will also get a PDF file with all my notes about the files as well. A LOT OF NOTES! I try to document what I did and why I did it so you will have a better understanding of Carbide Create and the carve itself. I also include a lot of tips and tricks that help in general. I will also share my experiences with purchasing inserts from Amazon as well as other vendors.
I can't test every insert available so you need to be able to adjust toolpaths to fit whatever insert you are purchasing. I help as much as possible with the included PDF.
Included in this digital download: Two Carbide Create Files, one with a regular size, one with a mini size bottle opener. One PDF with instructions and notes. NO SVG or other program files included.
Designed on CC Build 623 and 648
My photos will show my prototype and testing on some pine material. I suggest you use a hardwood for your final product. My photos also show cherry which worked great.
My photos show an engraving on the opposite side of the opener. I did that with a laser. The engraving IS NOT included in these files.
This is a digital download that includes ONLY Carbide Create files. If you are not knowledgeable of Carbide Create perhaps you should look at my other files that also include an SVG. THERE IS NO SVG IN THIS DOWNLOAD. Carbide Create can generate the GCode for you.
Bottle Opener Carbide Create Files - Digital Download
Two Sizes! Two Carbide Create files only. Download and Carve!
There is NO SVG. No GCode included. You will get the Carbide Create Files that are ready to create GCode and carve!
I have files for both the "mini" and what I consider "standard" sized bottle opener. I personally prefer the mini but you can easily make both and decide for yourself! Both of them will readily accept the "plate" style opener that you can purchase in bulk from many vendors. I’ll share links to the inserts I purchased from Amazon.
You can literally download this file, set your stock size, and start carving. Make one or nest them and make a dozen! These make great gifts.
It's your typical bottle opener design that you can find almost anywhere. I'm not recreating the wheel here. What I have done however, is brought it into Carbide Create, made adjustments, and added toolpaths.
You will also get a PDF file with all my notes about the files as well. A LOT OF NOTES! I try to document what I did and why I did it so you will have a better understanding of Carbide Create and the carve itself. I also include a lot of tips and tricks that help in general. I will also share my experiences with purchasing inserts from Amazon as well as other vendors.
I can't test every insert available so you need to be able to adjust toolpaths to fit whatever insert you are purchasing. I help as much as possible with the included PDF.
Included in this digital download: Two Carbide Create Files, one with a regular size, one with a mini size bottle opener. One PDF with instructions and notes. NO SVG or other program files included.
Designed on CC Build 623 and 648
My photos will show my prototype and testing on some pine material. I suggest you use a hardwood for your final product. My photos also show cherry which worked great.
My photos show an engraving on the opposite side of the opener. I did that with a laser. The engraving IS NOT included in these files.
This is a digital download that includes ONLY Carbide Create files. If you are not knowledgeable of Carbide Create perhaps you should look at my other files that also include an SVG. THERE IS NO SVG IN THIS DOWNLOAD. Carbide Create can generate the GCode for you.
Two Sizes! Two Carbide Create files only. Download and Carve!
There is NO SVG. No GCode included. You will get the Carbide Create Files that are ready to create GCode and carve!
I have files for both the "mini" and what I consider "standard" sized bottle opener. I personally prefer the mini but you can easily make both and decide for yourself! Both of them will readily accept the "plate" style opener that you can purchase in bulk from many vendors. I’ll share links to the inserts I purchased from Amazon.
You can literally download this file, set your stock size, and start carving. Make one or nest them and make a dozen! These make great gifts.
It's your typical bottle opener design that you can find almost anywhere. I'm not recreating the wheel here. What I have done however, is brought it into Carbide Create, made adjustments, and added toolpaths.
You will also get a PDF file with all my notes about the files as well. A LOT OF NOTES! I try to document what I did and why I did it so you will have a better understanding of Carbide Create and the carve itself. I also include a lot of tips and tricks that help in general. I will also share my experiences with purchasing inserts from Amazon as well as other vendors.
I can't test every insert available so you need to be able to adjust toolpaths to fit whatever insert you are purchasing. I help as much as possible with the included PDF.
Included in this digital download: Two Carbide Create Files, one with a regular size, one with a mini size bottle opener. One PDF with instructions and notes. NO SVG or other program files included.
Designed on CC Build 623 and 648
My photos will show my prototype and testing on some pine material. I suggest you use a hardwood for your final product. My photos also show cherry which worked great.
My photos show an engraving on the opposite side of the opener. I did that with a laser. The engraving IS NOT included in these files.
This is a digital download that includes ONLY Carbide Create files. If you are not knowledgeable of Carbide Create perhaps you should look at my other files that also include an SVG. THERE IS NO SVG IN THIS DOWNLOAD. Carbide Create can generate the GCode for you.
Bottle Opener Carbide Create Files - Digital Download
Two Sizes! Two Carbide Create files only. Download and Carve!
There is NO SVG. No GCode included. You will get the Carbide Create Files that are ready to create GCode and carve!
I have files for both the "mini" and what I consider "standard" sized bottle opener. I personally prefer the mini but you can easily make both and decide for yourself! Both of them will readily accept the "plate" style opener that you can purchase in bulk from many vendors. I’ll share links to the inserts I purchased from Amazon.
You can literally download this file, set your stock size, and start carving. Make one or nest them and make a dozen! These make great gifts.
It's your typical bottle opener design that you can find almost anywhere. I'm not recreating the wheel here. What I have done however, is brought it into Carbide Create, made adjustments, and added toolpaths.
You will also get a PDF file with all my notes about the files as well. A LOT OF NOTES! I try to document what I did and why I did it so you will have a better understanding of Carbide Create and the carve itself. I also include a lot of tips and tricks that help in general. I will also share my experiences with purchasing inserts from Amazon as well as other vendors.
I can't test every insert available so you need to be able to adjust toolpaths to fit whatever insert you are purchasing. I help as much as possible with the included PDF.
Included in this digital download: Two Carbide Create Files, one with a regular size, one with a mini size bottle opener. One PDF with instructions and notes. NO SVG or other program files included.
Designed on CC Build 623 and 648
My photos will show my prototype and testing on some pine material. I suggest you use a hardwood for your final product. My photos also show cherry which worked great.
My photos show an engraving on the opposite side of the opener. I did that with a laser. The engraving IS NOT included in these files.
This is a digital download that includes ONLY Carbide Create files. If you are not knowledgeable of Carbide Create perhaps you should look at my other files that also include an SVG. THERE IS NO SVG IN THIS DOWNLOAD. Carbide Create can generate the GCode for you.
Two Sizes! Two Carbide Create files only. Download and Carve!
There is NO SVG. No GCode included. You will get the Carbide Create Files that are ready to create GCode and carve!
I have files for both the "mini" and what I consider "standard" sized bottle opener. I personally prefer the mini but you can easily make both and decide for yourself! Both of them will readily accept the "plate" style opener that you can purchase in bulk from many vendors. I’ll share links to the inserts I purchased from Amazon.
You can literally download this file, set your stock size, and start carving. Make one or nest them and make a dozen! These make great gifts.
It's your typical bottle opener design that you can find almost anywhere. I'm not recreating the wheel here. What I have done however, is brought it into Carbide Create, made adjustments, and added toolpaths.
You will also get a PDF file with all my notes about the files as well. A LOT OF NOTES! I try to document what I did and why I did it so you will have a better understanding of Carbide Create and the carve itself. I also include a lot of tips and tricks that help in general. I will also share my experiences with purchasing inserts from Amazon as well as other vendors.
I can't test every insert available so you need to be able to adjust toolpaths to fit whatever insert you are purchasing. I help as much as possible with the included PDF.
Included in this digital download: Two Carbide Create Files, one with a regular size, one with a mini size bottle opener. One PDF with instructions and notes. NO SVG or other program files included.
Designed on CC Build 623 and 648
My photos will show my prototype and testing on some pine material. I suggest you use a hardwood for your final product. My photos also show cherry which worked great.
My photos show an engraving on the opposite side of the opener. I did that with a laser. The engraving IS NOT included in these files.
This is a digital download that includes ONLY Carbide Create files. If you are not knowledgeable of Carbide Create perhaps you should look at my other files that also include an SVG. THERE IS NO SVG IN THIS DOWNLOAD. Carbide Create can generate the GCode for you.
