Festool Vacuum Adapters - Dust Extractor Hose Attachment - Cleantec Quick Connect End Friction Fit
from $14.99
Festool Dust Extractor Attachments for the Cleantec, quick connect, style Hose. Hose ends. (1.40" Outside Diameter) See Photos!
I have the 27mm Cleantec hose as seen in the photos. Friction fit meaning, it goes on fairly stiff and sticks very well.
Another tool for myself that you may like. I needed a fan nozzle for the end of my extractor so I could gather up a wider path of dust on my bench and CNC and I wanted a detail nozzle to get into nooks and hard to reach spots. The rubber tip of the Festool hose fits firmly inside of these nozzles.
Two nozzles included. Fan Nozzle with about a 4" width at the fan. Also 4" in length.
Detail nozzle(the pointy one) is 5" long with a 1" tip.
Both of these are not bulky, not too long, and easy to store. Comes in green that really doesn't match the Festool green. Also, these are printed in PETG filament. It will withstand higher heats, sunlight, and a little more impact resitant (drop resistant and banging around) than common PLA filaments.
Don't forget to add the wall mount holder for these. It gives you a nice way to store them. Otherwise, they fit by dropping them into the vac top storage. (see video)
If you have the Festool Quick Connect hose with the rubberized end on it these are perfect for it. If you don't, drop me a message with your measurements.
Festool makes a lot of different extractors and hoses. These may not play nicely with all of them. Please measure your gear and/or message me with questions!
See my store for more Festool helper items. Bluetooth remote holder is so handy!
(only the nozzles are included. No hose, no vac. Mount extra)
Festool, accessory, accessories kit.
I have the 27mm Cleantec hose as seen in the photos. Friction fit meaning, it goes on fairly stiff and sticks very well.
Another tool for myself that you may like. I needed a fan nozzle for the end of my extractor so I could gather up a wider path of dust on my bench and CNC and I wanted a detail nozzle to get into nooks and hard to reach spots. The rubber tip of the Festool hose fits firmly inside of these nozzles.
Two nozzles included. Fan Nozzle with about a 4" width at the fan. Also 4" in length.
Detail nozzle(the pointy one) is 5" long with a 1" tip.
Both of these are not bulky, not too long, and easy to store. Comes in green that really doesn't match the Festool green. Also, these are printed in PETG filament. It will withstand higher heats, sunlight, and a little more impact resitant (drop resistant and banging around) than common PLA filaments.
Don't forget to add the wall mount holder for these. It gives you a nice way to store them. Otherwise, they fit by dropping them into the vac top storage. (see video)
If you have the Festool Quick Connect hose with the rubberized end on it these are perfect for it. If you don't, drop me a message with your measurements.
Festool makes a lot of different extractors and hoses. These may not play nicely with all of them. Please measure your gear and/or message me with questions!
See my store for more Festool helper items. Bluetooth remote holder is so handy!
(only the nozzles are included. No hose, no vac. Mount extra)
Festool, accessory, accessories kit.
Optional Add On:
Quantity:
Festool Dust Extractor Attachments for the Cleantec, quick connect, style Hose. Hose ends. (1.40" Outside Diameter) See Photos!
I have the 27mm Cleantec hose as seen in the photos. Friction fit meaning, it goes on fairly stiff and sticks very well.
Another tool for myself that you may like. I needed a fan nozzle for the end of my extractor so I could gather up a wider path of dust on my bench and CNC and I wanted a detail nozzle to get into nooks and hard to reach spots. The rubber tip of the Festool hose fits firmly inside of these nozzles.
Two nozzles included. Fan Nozzle with about a 4" width at the fan. Also 4" in length.
Detail nozzle(the pointy one) is 5" long with a 1" tip.
Both of these are not bulky, not too long, and easy to store. Comes in green that really doesn't match the Festool green. Also, these are printed in PETG filament. It will withstand higher heats, sunlight, and a little more impact resitant (drop resistant and banging around) than common PLA filaments.
Don't forget to add the wall mount holder for these. It gives you a nice way to store them. Otherwise, they fit by dropping them into the vac top storage. (see video)
If you have the Festool Quick Connect hose with the rubberized end on it these are perfect for it. If you don't, drop me a message with your measurements.
Festool makes a lot of different extractors and hoses. These may not play nicely with all of them. Please measure your gear and/or message me with questions!
See my store for more Festool helper items. Bluetooth remote holder is so handy!
(only the nozzles are included. No hose, no vac. Mount extra)
Festool, accessory, accessories kit.
I have the 27mm Cleantec hose as seen in the photos. Friction fit meaning, it goes on fairly stiff and sticks very well.
Another tool for myself that you may like. I needed a fan nozzle for the end of my extractor so I could gather up a wider path of dust on my bench and CNC and I wanted a detail nozzle to get into nooks and hard to reach spots. The rubber tip of the Festool hose fits firmly inside of these nozzles.
Two nozzles included. Fan Nozzle with about a 4" width at the fan. Also 4" in length.
Detail nozzle(the pointy one) is 5" long with a 1" tip.
Both of these are not bulky, not too long, and easy to store. Comes in green that really doesn't match the Festool green. Also, these are printed in PETG filament. It will withstand higher heats, sunlight, and a little more impact resitant (drop resistant and banging around) than common PLA filaments.
Don't forget to add the wall mount holder for these. It gives you a nice way to store them. Otherwise, they fit by dropping them into the vac top storage. (see video)
If you have the Festool Quick Connect hose with the rubberized end on it these are perfect for it. If you don't, drop me a message with your measurements.
Festool makes a lot of different extractors and hoses. These may not play nicely with all of them. Please measure your gear and/or message me with questions!
See my store for more Festool helper items. Bluetooth remote holder is so handy!
(only the nozzles are included. No hose, no vac. Mount extra)
Festool, accessory, accessories kit.
Festool Dust Extractor Attachments for the Cleantec, quick connect, style Hose. Hose ends. (1.40" Outside Diameter) See Photos!
I have the 27mm Cleantec hose as seen in the photos. Friction fit meaning, it goes on fairly stiff and sticks very well.
Another tool for myself that you may like. I needed a fan nozzle for the end of my extractor so I could gather up a wider path of dust on my bench and CNC and I wanted a detail nozzle to get into nooks and hard to reach spots. The rubber tip of the Festool hose fits firmly inside of these nozzles.
Two nozzles included. Fan Nozzle with about a 4" width at the fan. Also 4" in length.
Detail nozzle(the pointy one) is 5" long with a 1" tip.
Both of these are not bulky, not too long, and easy to store. Comes in green that really doesn't match the Festool green. Also, these are printed in PETG filament. It will withstand higher heats, sunlight, and a little more impact resitant (drop resistant and banging around) than common PLA filaments.
Don't forget to add the wall mount holder for these. It gives you a nice way to store them. Otherwise, they fit by dropping them into the vac top storage. (see video)
If you have the Festool Quick Connect hose with the rubberized end on it these are perfect for it. If you don't, drop me a message with your measurements.
Festool makes a lot of different extractors and hoses. These may not play nicely with all of them. Please measure your gear and/or message me with questions!
See my store for more Festool helper items. Bluetooth remote holder is so handy!
(only the nozzles are included. No hose, no vac. Mount extra)
Festool, accessory, accessories kit.
I have the 27mm Cleantec hose as seen in the photos. Friction fit meaning, it goes on fairly stiff and sticks very well.
Another tool for myself that you may like. I needed a fan nozzle for the end of my extractor so I could gather up a wider path of dust on my bench and CNC and I wanted a detail nozzle to get into nooks and hard to reach spots. The rubber tip of the Festool hose fits firmly inside of these nozzles.
Two nozzles included. Fan Nozzle with about a 4" width at the fan. Also 4" in length.
Detail nozzle(the pointy one) is 5" long with a 1" tip.
Both of these are not bulky, not too long, and easy to store. Comes in green that really doesn't match the Festool green. Also, these are printed in PETG filament. It will withstand higher heats, sunlight, and a little more impact resitant (drop resistant and banging around) than common PLA filaments.
Don't forget to add the wall mount holder for these. It gives you a nice way to store them. Otherwise, they fit by dropping them into the vac top storage. (see video)
If you have the Festool Quick Connect hose with the rubberized end on it these are perfect for it. If you don't, drop me a message with your measurements.
Festool makes a lot of different extractors and hoses. These may not play nicely with all of them. Please measure your gear and/or message me with questions!
See my store for more Festool helper items. Bluetooth remote holder is so handy!
(only the nozzles are included. No hose, no vac. Mount extra)
Festool, accessory, accessories kit.
