Milwaukee M12 Battery and Charger Holder - Wall Mount or Workbench Stand Alone - Charger Battery Organizer
from $39.99
M12 Battery System that I designed for myself and my shop. There is a lot of M12 Battery Storage! Wall mount option the cord will hide behind the mount neatly. This is THICK PETG plastic. It is not flimsy at all.
I don't see any reason why the 2.5ah battery wouldn't work but I have not tested it. I don't have one but will buy one soon.
This system is BOTH, Wall Mount, and able to stand on your workbench. See the Photo with Labels, A,B,C,D.
A - The main part is the charger mount. This is the single M12 charger holder (not the dual with M18, coming soon)
The charger mounts on the screws provided and the cord will tuck under the mount and out of the way. This is the wall mount portion. (Red)
B - The bottom portion is additional and adds storage for THREE, M12, 2.0ah batteries. This enables it to also stand on your workbench. (Black)
C - Side M12 Storage for 2 batteries. (Black)
D - An additional storage spot for a M12 battery. Get both of these if your standing it on your bench. (Red)
It looks good. It is sturdy. It holds a lot of batteries! The Red is not official Milwaukee Red so it may not match completely. Nothing else is included. If you see tools in photos they are for demonstration purposes only.
Just want a battery holder? Check my store, I got it!
I wanted to design something that looked good but also worked well enough to offer to you. Basically, the functionality had to surpass its looks in order for me to publish it.
This Wall Mount Design will get your chargers off of the work area and onto the wall. That was my top requirement when I designed it. I also didn't want the cords hanging all over the place. Lastly, I wanted it to slant and hold the batteries neatly. I didn't want them to sag in their holders or have any chance of falling out if they were perpendicular to the wall.
This is MY design for MY shop. I'm not affiliated with Milwaukee or any other manufacturer on Etsy. "There are many like it, but this one is mine!" You've heard that right?
The STL's are not for sale. They may be in the future but right now the prints are the only way to get these.
Lastly, is the color RED. Just assume my RED is not going to be a perfect match to your tool maker. Also, the colors, including black, could vary from print to print. Your order may have a varying shade of red from piece to piece. I do everything to make sure all is matched up but filaments are not perfect. Red is not red and Black is not black.
I'm also printing in reverse colors. Meaning, what you see in the photos I'll do in the opposite color. Red and Black only of course.
M18 is Done and currently testing! Let me know if you would need one. I'll get it officially listed soon.
Check my website for "factory seconds" and deep discounts.
I also foresee some tool storage options! Message me with any questions!
I don't see any reason why the 2.5ah battery wouldn't work but I have not tested it. I don't have one but will buy one soon.
This system is BOTH, Wall Mount, and able to stand on your workbench. See the Photo with Labels, A,B,C,D.
A - The main part is the charger mount. This is the single M12 charger holder (not the dual with M18, coming soon)
The charger mounts on the screws provided and the cord will tuck under the mount and out of the way. This is the wall mount portion. (Red)
B - The bottom portion is additional and adds storage for THREE, M12, 2.0ah batteries. This enables it to also stand on your workbench. (Black)
C - Side M12 Storage for 2 batteries. (Black)
D - An additional storage spot for a M12 battery. Get both of these if your standing it on your bench. (Red)
It looks good. It is sturdy. It holds a lot of batteries! The Red is not official Milwaukee Red so it may not match completely. Nothing else is included. If you see tools in photos they are for demonstration purposes only.
Just want a battery holder? Check my store, I got it!
I wanted to design something that looked good but also worked well enough to offer to you. Basically, the functionality had to surpass its looks in order for me to publish it.
This Wall Mount Design will get your chargers off of the work area and onto the wall. That was my top requirement when I designed it. I also didn't want the cords hanging all over the place. Lastly, I wanted it to slant and hold the batteries neatly. I didn't want them to sag in their holders or have any chance of falling out if they were perpendicular to the wall.
This is MY design for MY shop. I'm not affiliated with Milwaukee or any other manufacturer on Etsy. "There are many like it, but this one is mine!" You've heard that right?
The STL's are not for sale. They may be in the future but right now the prints are the only way to get these.
Lastly, is the color RED. Just assume my RED is not going to be a perfect match to your tool maker. Also, the colors, including black, could vary from print to print. Your order may have a varying shade of red from piece to piece. I do everything to make sure all is matched up but filaments are not perfect. Red is not red and Black is not black.
I'm also printing in reverse colors. Meaning, what you see in the photos I'll do in the opposite color. Red and Black only of course.
M18 is Done and currently testing! Let me know if you would need one. I'll get it officially listed soon.
Check my website for "factory seconds" and deep discounts.
I also foresee some tool storage options! Message me with any questions!
Options - See 3rd Photo and Description:
Quantity:
M12 Battery System that I designed for myself and my shop. There is a lot of M12 Battery Storage! Wall mount option the cord will hide behind the mount neatly. This is THICK PETG plastic. It is not flimsy at all.
I don't see any reason why the 2.5ah battery wouldn't work but I have not tested it. I don't have one but will buy one soon.
This system is BOTH, Wall Mount, and able to stand on your workbench. See the Photo with Labels, A,B,C,D.
A - The main part is the charger mount. This is the single M12 charger holder (not the dual with M18, coming soon)
The charger mounts on the screws provided and the cord will tuck under the mount and out of the way. This is the wall mount portion. (Red)
B - The bottom portion is additional and adds storage for THREE, M12, 2.0ah batteries. This enables it to also stand on your workbench. (Black)
C - Side M12 Storage for 2 batteries. (Black)
D - An additional storage spot for a M12 battery. Get both of these if your standing it on your bench. (Red)
It looks good. It is sturdy. It holds a lot of batteries! The Red is not official Milwaukee Red so it may not match completely. Nothing else is included. If you see tools in photos they are for demonstration purposes only.
Just want a battery holder? Check my store, I got it!
I wanted to design something that looked good but also worked well enough to offer to you. Basically, the functionality had to surpass its looks in order for me to publish it.
This Wall Mount Design will get your chargers off of the work area and onto the wall. That was my top requirement when I designed it. I also didn't want the cords hanging all over the place. Lastly, I wanted it to slant and hold the batteries neatly. I didn't want them to sag in their holders or have any chance of falling out if they were perpendicular to the wall.
This is MY design for MY shop. I'm not affiliated with Milwaukee or any other manufacturer on Etsy. "There are many like it, but this one is mine!" You've heard that right?
The STL's are not for sale. They may be in the future but right now the prints are the only way to get these.
Lastly, is the color RED. Just assume my RED is not going to be a perfect match to your tool maker. Also, the colors, including black, could vary from print to print. Your order may have a varying shade of red from piece to piece. I do everything to make sure all is matched up but filaments are not perfect. Red is not red and Black is not black.
I'm also printing in reverse colors. Meaning, what you see in the photos I'll do in the opposite color. Red and Black only of course.
M18 is Done and currently testing! Let me know if you would need one. I'll get it officially listed soon.
Check my website for "factory seconds" and deep discounts.
I also foresee some tool storage options! Message me with any questions!
I don't see any reason why the 2.5ah battery wouldn't work but I have not tested it. I don't have one but will buy one soon.
This system is BOTH, Wall Mount, and able to stand on your workbench. See the Photo with Labels, A,B,C,D.
A - The main part is the charger mount. This is the single M12 charger holder (not the dual with M18, coming soon)
The charger mounts on the screws provided and the cord will tuck under the mount and out of the way. This is the wall mount portion. (Red)
B - The bottom portion is additional and adds storage for THREE, M12, 2.0ah batteries. This enables it to also stand on your workbench. (Black)
C - Side M12 Storage for 2 batteries. (Black)
D - An additional storage spot for a M12 battery. Get both of these if your standing it on your bench. (Red)
It looks good. It is sturdy. It holds a lot of batteries! The Red is not official Milwaukee Red so it may not match completely. Nothing else is included. If you see tools in photos they are for demonstration purposes only.
Just want a battery holder? Check my store, I got it!
I wanted to design something that looked good but also worked well enough to offer to you. Basically, the functionality had to surpass its looks in order for me to publish it.
This Wall Mount Design will get your chargers off of the work area and onto the wall. That was my top requirement when I designed it. I also didn't want the cords hanging all over the place. Lastly, I wanted it to slant and hold the batteries neatly. I didn't want them to sag in their holders or have any chance of falling out if they were perpendicular to the wall.
This is MY design for MY shop. I'm not affiliated with Milwaukee or any other manufacturer on Etsy. "There are many like it, but this one is mine!" You've heard that right?
The STL's are not for sale. They may be in the future but right now the prints are the only way to get these.
Lastly, is the color RED. Just assume my RED is not going to be a perfect match to your tool maker. Also, the colors, including black, could vary from print to print. Your order may have a varying shade of red from piece to piece. I do everything to make sure all is matched up but filaments are not perfect. Red is not red and Black is not black.
I'm also printing in reverse colors. Meaning, what you see in the photos I'll do in the opposite color. Red and Black only of course.
M18 is Done and currently testing! Let me know if you would need one. I'll get it officially listed soon.
Check my website for "factory seconds" and deep discounts.
I also foresee some tool storage options! Message me with any questions!
M12 Battery System that I designed for myself and my shop. There is a lot of M12 Battery Storage! Wall mount option the cord will hide behind the mount neatly. This is THICK PETG plastic. It is not flimsy at all.
I don't see any reason why the 2.5ah battery wouldn't work but I have not tested it. I don't have one but will buy one soon.
This system is BOTH, Wall Mount, and able to stand on your workbench. See the Photo with Labels, A,B,C,D.
A - The main part is the charger mount. This is the single M12 charger holder (not the dual with M18, coming soon)
The charger mounts on the screws provided and the cord will tuck under the mount and out of the way. This is the wall mount portion. (Red)
B - The bottom portion is additional and adds storage for THREE, M12, 2.0ah batteries. This enables it to also stand on your workbench. (Black)
C - Side M12 Storage for 2 batteries. (Black)
D - An additional storage spot for a M12 battery. Get both of these if your standing it on your bench. (Red)
It looks good. It is sturdy. It holds a lot of batteries! The Red is not official Milwaukee Red so it may not match completely. Nothing else is included. If you see tools in photos they are for demonstration purposes only.
Just want a battery holder? Check my store, I got it!
I wanted to design something that looked good but also worked well enough to offer to you. Basically, the functionality had to surpass its looks in order for me to publish it.
This Wall Mount Design will get your chargers off of the work area and onto the wall. That was my top requirement when I designed it. I also didn't want the cords hanging all over the place. Lastly, I wanted it to slant and hold the batteries neatly. I didn't want them to sag in their holders or have any chance of falling out if they were perpendicular to the wall.
This is MY design for MY shop. I'm not affiliated with Milwaukee or any other manufacturer on Etsy. "There are many like it, but this one is mine!" You've heard that right?
The STL's are not for sale. They may be in the future but right now the prints are the only way to get these.
Lastly, is the color RED. Just assume my RED is not going to be a perfect match to your tool maker. Also, the colors, including black, could vary from print to print. Your order may have a varying shade of red from piece to piece. I do everything to make sure all is matched up but filaments are not perfect. Red is not red and Black is not black.
I'm also printing in reverse colors. Meaning, what you see in the photos I'll do in the opposite color. Red and Black only of course.
M18 is Done and currently testing! Let me know if you would need one. I'll get it officially listed soon.
Check my website for "factory seconds" and deep discounts.
I also foresee some tool storage options! Message me with any questions!
I don't see any reason why the 2.5ah battery wouldn't work but I have not tested it. I don't have one but will buy one soon.
This system is BOTH, Wall Mount, and able to stand on your workbench. See the Photo with Labels, A,B,C,D.
A - The main part is the charger mount. This is the single M12 charger holder (not the dual with M18, coming soon)
The charger mounts on the screws provided and the cord will tuck under the mount and out of the way. This is the wall mount portion. (Red)
B - The bottom portion is additional and adds storage for THREE, M12, 2.0ah batteries. This enables it to also stand on your workbench. (Black)
C - Side M12 Storage for 2 batteries. (Black)
D - An additional storage spot for a M12 battery. Get both of these if your standing it on your bench. (Red)
It looks good. It is sturdy. It holds a lot of batteries! The Red is not official Milwaukee Red so it may not match completely. Nothing else is included. If you see tools in photos they are for demonstration purposes only.
Just want a battery holder? Check my store, I got it!
I wanted to design something that looked good but also worked well enough to offer to you. Basically, the functionality had to surpass its looks in order for me to publish it.
This Wall Mount Design will get your chargers off of the work area and onto the wall. That was my top requirement when I designed it. I also didn't want the cords hanging all over the place. Lastly, I wanted it to slant and hold the batteries neatly. I didn't want them to sag in their holders or have any chance of falling out if they were perpendicular to the wall.
This is MY design for MY shop. I'm not affiliated with Milwaukee or any other manufacturer on Etsy. "There are many like it, but this one is mine!" You've heard that right?
The STL's are not for sale. They may be in the future but right now the prints are the only way to get these.
Lastly, is the color RED. Just assume my RED is not going to be a perfect match to your tool maker. Also, the colors, including black, could vary from print to print. Your order may have a varying shade of red from piece to piece. I do everything to make sure all is matched up but filaments are not perfect. Red is not red and Black is not black.
I'm also printing in reverse colors. Meaning, what you see in the photos I'll do in the opposite color. Red and Black only of course.
M18 is Done and currently testing! Let me know if you would need one. I'll get it officially listed soon.
Check my website for "factory seconds" and deep discounts.
I also foresee some tool storage options! Message me with any questions!
